HOME & SITE

ME

GRAPHICS

YOU

SIBLINGS & AFFILIATES

ROTATION

Bracelet » Knot

This is what you will be making today:

• Pick out 4 colored strings- 2 of each color.
  I chose Green and White. It'll be the easiest if you pick the same colors, but if you want to use others, you must replace the colors in the tutorial.
  
• Knot all 4 strings. Leave a few inches on the end so that you can tie the bracelet later.
  
• Clip the strings onto the binder (or some hard surface) with a clip. Bigger Image
  
• Separate the two colors, with green on the left and the white on the right (or respectively in your own colors)
  
• Cross the left two strings (Green) over the right two strings (White) to make a big 4.
  
• Pull the Green from under the White to the left.
  
• Pull the Green strings, holding the White down to make a knot.
  
• Put the green back onto the left side, and make an inverse 4 with the two White strings.
  
• Loop the White strings under the Green ones and pull to the left as shown in the picture.
  
• Pull the inverse 4 to the left into a knot.
  
  
• Keep on repeating the above steps. Remember to always have the Green on the left side, and pull everything to the left!
  
• Stop and knot off the end as you did in the beginning when the bracelet becomes long enough. Cut the excess off, leaving a few inches.

See? Super easy! Now you can make more for your friends, yourself, your stuffed animals...

Questions? E-mail blankynoir@yahoo.co.jp with the title- Tutorial Question

Go back